TP-Link Deco router is among the fastest and most reliable means to establish wireless internet connection at homes. The router is easy to set up and configure. You can use the app or the web-based setup wizard, to manage the router and customise other settings easily. If you have a TP-Link Deco at home that is losing connection to WiFi or internet often, learning how to get things resolved becomes easy. This blog will walk you through the steps to troubleshoot the tp link deco not connecting to internet issues.
But first, What are the reasons for unstable internet connection?
Unstable internet connections typically arise from network service disruptions from the ISP(Internet Service Provider) end. However, outdated firmware versions, or incorrect network settings can also cause your TP-Link Deco router to lose internet connection. If you have been facing such issues with your TP-Link Deco, following the right troubleshooting steps becomes important. If your tp link deco won’t connect to internet, identify the main reason and then following the appropriate troubleshooting steps is key.
Troubleshooting TP Link Deco keeps dropping connection Issues
Internet connection issues may arise with both wired and wireless connections. For Wired connections, always ensure that when the computer is connected to an internet modem, the internet works fine without dropping. If it doesn’t, you will need to connect with your ISP and get the issue rectified. If you still find tp link deco not connecting to internet, you can follow the troubleshooting steps mentioned below:
- Disconnect the ethernet cables attached to the devices and inspect them for any damages. If you find any issues with the cables, you can replace them with new CAT5E ethernet cables. Now try connecting the devices and accessing the internet on your computer.
- Try to change the DNS servers on your router device. You can sign in to the web-based setup wizard and head to the internet connection settings to make the changes. Once the changes are done, save them and reboot the router for the settings to take effect.
- Check if your TP-link deco router is on the latest firmware version. You can sign in to the device setup wizard and head on the device administration wizard to check and see if the same is updated.
TP Link Deco keeps dropping connection over Wireless Connection
- Ensure that the router is kept away from the microwave ovens and other similar devices which can generate possible interference among the network.
- Try reducing the number of client devices, meaning disconnect some devices that are not in use. Overutilisation may be one of the reasons, which can be prevented and the signal quality can be improved.
- You can also try adjusting the orientation of the antennas for maximum network performance. You can keep the router up high and adjust the antennas at a 45-degree angle or a 0-degree angle(which is straight out parallel to the floor). This position is more effective and antennas can transmit signals to a longer distance as well.
- You can try connecting to the 5GHz network band of the router network, since it observes the least amount of signal interference.
- If you have the smart connect feature enabled on your router, disable the same. If your router doesn’t support this feature or doesn’t have this, you can skip this step.
- Check if there are multiple WiFi networks in the area. If so, change the router’s WiFi channel and channel width settings. Doing so will avoid multiple WiFi signals on the same channel and reduce the WiFi interference.
- Update the router firmware to the latest version. Outdated firmware issues can also bring up issues with the device signal quality and severely hamper network performance. Therefore, whenever your tp link deco won’t connect to internet, always ensure that the router firmware is updated to the latest version.
FAQs
What should I do if my tp link deco keeps dropping connection?
If you find your tp link deco not connecting to internet, or dropping the internet connection whenever you try to access the same, check if the internet service is active or not. To do that, connect the computer directly to the internet MODEM using an ethernet cable. If the internet works, proceed with the other troubleshooting steps discussed in the blog. If it doesn’t, you will need to connect with your ISP to get the service fixed first.
My tp link deco won't connect to internet, should I reset the router?
No, resetting the router shouldn’t be the first step in the troubleshooting process. You can try restarting the device. Turn off the devices and unplug them from the power outlet as well. Keep them turned off for about 30 seconds and then reboot them to see if the issue is fixed. For advanced troubleshooting steps, you can read through the blog, or reach out to the team of experts at our end.
How do I reset TP-Link Deco router?
You can reset your router using the reset button available on the router. Press and hold the same for about 10-15 seconds and when the router LED begin to flash, release it. Allow the reset process to complete and the device to reboot. Once that happens, you can reconfigure the internet settings and connect your devices to the internet.
The Final Word
Being unable to use the internet can be frustrating. What’s even more infuriating is the router dropping connection frequently. This not only jeopardizes information security but also hamper security and privacy. If your tp-link deco keeps dropping connection, you can always follow some easy troubleshooting steps to get it resolved and then proceed with accessing the internet with ease. If the issue persists, or you fail to regain access to the internet, you can reset the device to factory settings and then reconfigure the same for internet access.
Need more help with TP-Link Deco Internet Issues?
Connect with the team of experts at our end for help, today!